Code Flame 384, Руководство пользователя

Страница: 12 / 21

CODE Flame 384 User’s Manual
http://www.codelight.com 10
CH 1 2 3 4 5 6 7 8 | X:120
123 58 204 32 12 0 0 0 | Y:891
The manual mode
The scanner’s channel values, such as intensity, gobo, X/Y, pattern, and color, can be set manually.
Usually, the control contents of each channel of various scanners are different. With the particular comprehension
to the control contents of each channel of various scanners, the scanner connected to the control net can be
controlled with facility. The control contents of each channel of ordinary scanners can be seen in the append
tables.
In the edit state or running state, it can be operated manually.
Manual operation is the highest priority operation. The chosen scanner will be divorced from the running scene,
Chase and environment automatically. Manual operation is the basic operation. Manual operation, especially multi
scanner manual operation, can be saved as scene, which is the basic operation of edit Chase step.
When the number indicating light is on, that scanner is in the chosen state. It can be set by CHANNELS sliders and
modulation wheels.
CHANNELS 1-24 channel sliders and modulation wheesl
The values of each channel of scanners can be set by 1-16 channel sliders. X channel of a scanner is set by
modulation wheel WX . Y channel is set by modulation wheel ST . The set range of a slider is 0-255. Whether
8bit or 16Bit X/Y scanner, the set range of a modulation wheel is 0-999. It represents the moving range of X
axis or Y axis. For 16Bit scanner, modulation wheel WX controls X-H and X-L at the same time. Modulation
wheel ST controls Y-H and Y-L at the same time. For 8Bit scanner, modulation wheel WX controls X-H only.
Modulation wheel ST controls Y-H only.
When the X/Y channel is controlled by modulation wheels, the corresponding X/Y slider is locked. The X/Y
position of a scanner must be set by modulation wheels.
In the manual mode of a scanner, slider and modulation wheel can change the value of the corresponding
channel. The screen displays the value of these channels.
When the scanner key is pressed, the X/Y current appears at the right part of the screen. Turn the modulation
wheels, the values of X/Y can be changed.
Move 1-8 channel slider, the screen displays:
Move 9-16 channel slider, the screen displays:
Note: the values of channel and X/Y depend on the slider position and the X/Y modulation wheel value. In a
moment of slider moving, the value display will disappear until the next moving.
Manual operation of single scanner
1
．
Press HOLD key to make the indicating light off.
2
．
Choose scanner: press scanner number key, the indicating light is on.
3
．
Use CHANNELS sliders to set the channel values, use modulation wheel WX and ST to adjust X/Y
position.
CH 9 10 11 12 13 14 15 16 | X:120
0 0 14 128 0 0 0 0 | Y:891