Code Flame 384, Руководство пользователя

Страница: 13 / 21

CODE Flame 384 User’s Manual
http://www.codelight.com 11
Manual operation of the same kind multi scanners
1
．
Press HOLD key to make the indicating light off.
2 ． Choose scanner: according to the 2 step of Manual operation of single scanner, multi scanners can be
chosen. (Note: only the scanners with the same X/Y channel can be chosen at the same time.)
3 ． Use CHANNELS sliders to set the channel values. Use modulation wheel
WX
to adjust X position. Use
modulation wheel ST to adjust Y position. And the adjusted channel values are set to all chosen
scanners at the same time.
Manual operation of the different kind of multi scanners
For the manual operation of the different kind of scanners, set one kind of the scanners and make these
scanners in the hold state first. Then choose another kind of the scanners to set. This is also the usual
operation method to set 1 scene. The hold state of the scanner can be change to the choosing state by
pressing its key to make the indicating light on.
1
．
Press HOLD key to make the indicating light on.
2 ． Choose scanner: use the way of choosing single scanner or multi scanners to choose scanners. (Note:
only the scanners with the same X/Y channel can be chosen at the same time.)
3 ． Use CHANNELS sliders to set the channel values. Use modulation wheel WX and ST to adjust X/Y
position.
4 ． Press the corresponding number key of the chosen scanner to make the indicating light blink. The set
values of these scanners are in the hold state. And the adjusted channel values are set to all chosen
scanners at the same time.
5 ． Repeat 2-4 steps to set other scanners manually.
Cancel the manual operation of scanner
Press CLEAR key, the manual operation is canceled and the set values of the scanners can not be saved.
Scene Edit
The appropriate values of channels (such as color, intensity, pattern, X/Y, and so on) of various scanners can make
a needed light art pattern in the space-scene. Each scene is an aggregate of the set channels of the various
scanners. Flame 384 console can save 48 scanner scenes. The saved scenes can be run at any moment.
Important tips
For the simultaneous running of the multi scenes and multi Chases, the different values of the same channel
which are produced at the same time are treated by HTP Technique. So following setting is proposed:
1
．
For all scenes which just include pattern effect controls, such as color, pattern, and so on, the values of
X/Y, intensity, and so on are set to 0.
2
．
If Chase just include the controls like X/Y, intensity, and so on, the values of the other channels are set
to 0.