Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-162-E
page 37 of 56
Centry®
Administrator Guide
Other Settings
Refer to the Centry Guide to complete the setup of the Centry, including Numbers, General Set-
tings, Hardware Settings and Action Scripts. When finished, click Apply Now to restart the phone; it
should now register to CUCM and be able to place calls in the assigned calling search space as well
as receive calls at the directory number it is configured with.
Note: If you are setting up the Centry with secondary account support, make sure that you
create each failover number twice.
UCM CONFIGURATION
All UCM-side configuration is done within the Cisco Unified CM Administration web interface.
Create Phone Security Profile
1. Navigate to System > Security > Phone Security Profile.
2. Do a Find on “Third-party” to locate the Third-party SIP Device Basic - Standard SIP Non-
Secure Profile. Click the Copy icon.
3. Check Enable Digest Authentication.
4. Change the Name and Description to Code Blue Centry Profile.
5. Click Save.
Configure End Users
For each Centry device, configure a new end user for SIP authentication.
1. Navigate to User Management > End User.
2. Click Add New.
3. For the User ID, enter the hexadecimal version of the MAC address; e.g. 00:50:C2:17:7B:E8
would become 0050c2177be8.
a. Use of the MAC address as user ID is only a recommendation. If local configuration
permits, you can use any other form of user ID; just be sure to record which user ID
goes with which phone and which of the phone’s accounts.
4. Fill in the Last Name field with a description of the station.
Create and record a secure SIP password and fill in the Digest Credentials and Confirm
Digest Credentials fields with this password. You will be entering this password later into
the Centry.
5. Click Save.