Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-162-E
page 36 of 56
Centry®
Administrator Guide
12 Configuring for Cisco Unified Communications
Manager 9
PREPARATION
1. Record the MAC address and determine the current IP address for each Centry
device you wish to use with CUCM.
2. Determine which partition you will put the Centry directory numbers into.
3. Obtain one directory number for each Centry device.
a. If you are going to use the Centry’s dual account configuration to register to redun-
dant CUCM servers, obtain a second directory number for each Centry device.
4. Determine which calling search space you will assign to the Centry.
CENTRY CONFIGURATION
Configure Account(s)
1. Log in to Centry via its web interface. The default username and password
are admin and admin.
2. Select Account 1.
3. For VoIP Protocol, select SIP and RTP.
4. Under SIP Configuration, for Username/Number enter the directory number you assigned
earlier.
5. For Display Name, enter caller ID text.
6. For Domain, enter the hostname or IP address of the CUCM node you wish to register this
account to.
7. Insure Keep-Alive is enabled.
8. Under Proxy Authentication, for Username enter the username you assigned the CUCM
end user, e.g. the hexadecimal representation of the MAC address or the local-use variant
for a secondary account.
9. For Password, enter the password you entered into Digest Credentials under the CUCM
end user.
10. Click Save.
11. Repeat steps 3-10 with Account 2 if you are using the second account.