Code Alarm CA-630, Руководство по установке

Страница: 11 / 24

11
2. Advanced Harness (A)
22/B LED2 (20 AWG+)
23/B LED1 (20 AWG-)
Locate a visible section of the dash with 1" clearance behind
the location.
Drill a 9 /
32
" hole and snap the Status Indicator into place.
Connect the Status Indicator Red Wire to the 22/B LED2 wire.
Connect the Status Indicator Black Wire to the 23/B LED1 wire.
9/A Trunk Switch 87A (20 AWG) (TAN/RED)
This wire is the normally closed pin (87A) for the internal trunk
release relay. If the vehicle has a 5-wire type trunk release it will be
necessary to cut that wire and connect 9/A to the switch side of that
wire.
Note: See 13/B description (Basic Harness).
11/A Rear Defrost Output/Aux 2 500ma (20 AWG -) (BLU/WHITE)
Locate the vehicle rear window defrost wire.
Verification: This wire will register either positive voltage or ground
when the rear defroster is turned on.
Connect the 11/A wire to the vehicle defrost wire if the system
is negative.
If the system is positive, use a SPDT relay (not supplied) and
connect the 11/A wire as shown (Diagram 11.5).
11/A defrost
wire
+12v fused
Diagram 11.5
To vehicle
defrost wire
14/A Armed Output (20 AWG -)(ORANGE) 500mA
This wire will show a ground when the security system is armed.
630.p65 10/17/03, 7:29 PM 11