![background image](http://html.mh-extra.com/html/cobra/marine-mr-hh600-flt-gps-bt-e/marine-mr-hh600-flt-gps-bt-e_owners-manual_2630569019.webp)
33
Nothing
Comes Close to a Cobra
®
VHF Marine Radio Protocols
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Advanced Operation
VHF Marine Radio Protocols
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Advanced Operation
32 English
Memory Channels
You can program (or tag) any or all channels to be scanned in the
Memory
Scan
mode .
To Program Memory Channels:
1.
From
Standby
mode, select a channel to be tagged using
the
Up/Down
buttons.
2.
Press the
MORE soft key
(if necessary), then the
MEM
soft key
.
The channel will be tagged for scanning and
MEM
(memory channel) will appear on the LCD whenever
that channel is selected .
Repeat steps 1 through 2 to add addition memory channels .
To Clear Memory Channels:
1.
Simply reverse the steps above . MEM (Memory Channel)
will no longer appear on the LCD whenever that channel is
selected .
Memory Scan
During
Memory Scan
, the radio will rapidly switch from tagged
channel to tagged channel . Whenever any activity is detected,
the radio will stop the scan to allow you to listen to the activity
on that channel . The radio will then continue to scan after 2
seconds of inactivity, unless you switch out of the
Memory Scan
mode .
88
14
88
30
60
75
79
A
68
69
71
72
78
A
88
15
30
60
75
Scanning with Priority
Channel Off
NOTE
Memory channels must be programmed to use memory
Scan . The radio will enter standard Scan Mode if no
memory Channels are programmed .
NOTE
The radio must be squelched for the
Memory Scan
mode to function . See page 15
for squelch procedure .
To Enter Memory Scan:
From
Standby
mode, press the
MORE soft key
(if necessary),
then the
SCAN soft key
.
The radio will immediately begin to scan the channels you
tagged . MEM SCAN will be highlighted on the LCD .
The radio will then continue to scan after 2 seconds of inactivity,
unless you switch out of the
Memory Scan
mode .
To exit Memory Scan, press the
SCAN soft key or Talk Button
.
This will return the radio to
Standby
mode on the last selected
channel .
COMML
A
MEM COMP MARK MORE
TIME: 10:00 UTC
DATE: 06/01
41° 54.523N
087° 47.192W
INTL 1W MEM
Channel Up/Down Buttons
More Soft Key
Channel Select
Standby Mode
MEM SCAN
TW H/M/L SCAN MORE
TIME: 10:00 UTC
DATE: 06/01
41° 54.523N
087° 47.192W
INTL 1W MEM
68
Memory Scan
88
14
88
30
60
75
16
Scanning with Priority
Channel On
MRHH600EU_ENG_MANL.indd 32-33
4/4/17 2:55 PM