![background image](http://html.mh-extra.com/html/cobra/marine-mr-hh600-flt-gps-bt-e/marine-mr-hh600-flt-gps-bt-e_owners-manual_2630569007.webp)
9
Nothing
Comes Close to a Cobra
®
Wrist Strap and Belt Clip
Belt Clip
Insert Belt Clip onto Radio
H M L
MOB
SQL
16+
MARINE HH600 DSC+GPS
WX
MENU
CALL MORE
16
A
EMERGENCY
USA 6W
32 49.800N
SOG: 3.7 KTS
COG: 015 M
999.11.077W
DATE:06/30
TIME:10:00 LOC
Secure Radio
VHF Marine Radio Protocols
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Installation
8 English
VHF Marine Radio Protocols
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Installation
Wrist Strap and Belt Clip
•
Use the spring-loaded belt clip to carry the radio on your person .
1.
Slide the belt clip into the guide channel on the back of the
radio until it is locked in place .
2.
To attach the wrist strap, insert it through the hole at the top
of the belt clip, feed it through the looped end and pull tight to
secure to the belt clip .
3.
Press open the belt clip, slide it over the belt and release the
clip .
4.
To remove the belt clip from the radio press the tab on the belt
clip, which unlocks the clip, and slide it out .
Wrist Strap Attachment
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Charging
The Cobra-provided LiON battery pack may be charged at home,
in a car or in a boat using the appropriate 12V or 120V power cord
with the charger .
1.
Insert one (1) of the power cords into the back of the drop-in
charger .
2.
Insert the other end of the power cord into the appropriate 12V
or 120V power source .
3.
Remove the battery pack spacer from the charger and insert the
entire radio/battery into the charger . The metal charge contacts
on the battery will contact the mating prongs in the charger to
transfer the charging current .
4.
Observe that the red light on the front of the charger glows to
indicate that the battery pack is properly seated and the charger
is operating .
5.
Allow the batteries to charge for five (5) to six (6) hours before
use . The charge light will turn off when the battery is fully
charged .
WARNING
The charger provided for this radio is only to be used to
charge the battery pack provided . Do not charge any other
type of batteries in the charger as fire, explosion or battery
damage may occur . Avoiding extreme temperatures will
also help prolong the life of the battery pack for the radio .
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
NOTE
If the drop-in charger is used on a boat, Cobra
recommends you attach it to a horizontal shelf or vertical
bulkhead (using the screw holes provided) to prevent
possible damage due to the boat rolling or pitching . The
charging base has been designed to hold the battery pack in
place during rough sea conditions .
WARNING
The adapter shall be installed near the radio’s charger
and shall be easily accessible . The plug is considered a
disconnect device of the charging base .
Initial Battery Charge
Power Sources
MRHH600EU_ENG_MANL.indd 8-9
4/4/17 2:55 PM