VHF Marine Radio Protocols
17
Nothing
Comes Close to a Cobra
®
VHF Marine Radio Protocols
16 English
Getting Started
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Setup Mode Programming
Set-Up Routines
•
Settings Menu
The
Settings
menu in the CobraMarine VHF radio allows you to turn
On
and
Off
many of
its features, to adjust other features to suit your preferences, and to enter your user MMSI
number .
To Enter The Settings Menu:
Press the
Menu
button .
The
Settings
menu will appear on the LCD.
After entering the
Settings
menu, you can scroll through it
to make as many entries as you like . Whenever the setting
selection highlight appears in a feature portion of the menu, the
current active setting is highlighted .
When you are finished with changes, you can exit the
Settings
menu by pressing the Exit soft key and return to
Standby
mode .
To Exit The Settings Menu:
Use the
Up/Down
buttons to scroll down to
EXIT at the bottom
of the menu, or press the Exit soft key to move up through the
menu until the radio returns to the
Standby
mode.
NOTE
Basic set-up routines are described here . For set-up routines
that apply specifically to a particular function, they are included
in the section for that function .
Channel Up/Down Buttons
Menu Soft Key
MENU
DSC SETUP MENU
LAMP ADJUST
CONTRAST ADJUST
KEY TONE
UIC CHANNEL MODE
TIME ADJUST
EXIT ENTER
Backlight Lamp Adjust
The LCD has a
Backlight
lamp to make it visible in the dark .
This lamp can be adjusted for brightness or turned Off .
To Adjust The Backlight Level:
1.
Enter the
Settings
menu and scroll to LAMP ADJUST with the
Up/Down
soft keys or using the Up/Down channel buttons .
2.
Press the
ENTR
soft key and observe the current backlight
setting — HIGH, MEDIUM, LOW or OFF .
3.
Use the
Up/Down
buttons or
Right/Left
soft keys to switch to
the setting you want .
4.
Press the
ENTR
soft key to select the backlight setting . Or
press the
EXIT
soft key to EXIT without making changes to the
backlight setting .
5.
The radio will return to the Settings menu . The radio will
remember the saved backlight setting, when powering off the
radio, or disconnecting power to the radio .
NOTE
Setting the radio to a lower backlight setting will conserve
battery power .
LCD Contrast Adjust
The LCD backlight will not be visible in daylight, but the
LCD
Contrast
can be adjusted to make it easier to read in different
light conditions .
To Change The Contrast:
1.
Enter the
Settings
menu and scroll to CONTRAST ADJUST
Up/Down
soft keys or the
UP/Down
channel
buttons .
2.
Press the
ENTR
soft key and observe the current contrast
setting — a number between one 0 and 16 .
3.
Use the
Up/Down
buttons or the
Right/Left
soft keys to
change the number up or down .
4.
Press the
ENTR
soft key to select a contrast level . Or press the
EXIT
soft key to EXIT without making changes to the Contrast
setting .
5.
The radio will return to the settings menu . The radio will
remember the saved contrast level, when powering off the
radio, or disconnecting power to the radio .
EXIT ENTER
MED
LAMP ADJUST
2
Channel Up/Down Buttons
Menu Soft Key
EXIT ENTER
CONTRAST ADJUST
8
Channel Up/Down Buttons
Menu Soft Key
MRHH600EU_ENG_MANL.indd 16-17
4/4/17 2:55 PM
