Cobra CS9, Руководство по обслуживанию

Страница: 15 / 35

4
Cleaning / Maintenance
11
© Moffat Ltd, August 2012
Revision 3
Moffat Cobra Series CS9 - Gas Salamander
C
AUTION
:
Always turn off the gas supply before cleaning.
This unit is not water proof.
Do not use water jet spray to clean interior or exterior of this unit.
4.1 Cleaning
General
To achieve the best results cleaning must be
regular and thorough. All controls and mechanical
parts should be checked and adjusted periodically
by a qualified service person. If any small faults
occur, have them attended to promptly.
Don't wait until they cause a complete breakdown.
It is recommended that the appliance is serviced
every 6 months.
Clean the salamander regularly. A clean appliance
looks better, will last longer and will perform
better.
Racking
For ease of cleaning of this unit and the racking
system and to achieve the best results, it is
recommended that the racking is removed
completely from the unit and cleaned
independently. This will allow for a more thorough
cleaning of the Salamander.
To remove the racking system, carry out the
following instructions.

Remove the Crumb / Drip Tray from the
underside of the salamander unit.
 Remove the Branding Plate from the rack (if
fitted).

Slide the rack out of the side racks and remove
from the unit.
 Remove the left and right hand side racks from
the unit by removing the single securing screw
from each of the side racks.
 Withdraw the left and right hand side racks
from the unit.
 Refit the racking in the reverse order once
cleaning has been completed.
Stainless Surfaces
Clean with detergent. Baked on deposits or
discolouration may require a good quality stainless
steel cleaner or stainless steel wool. Always apply
the cleaner when the Salamander is cool and rub in
the direction of the 'Grain'.
Enamelled Surfaces
Do not use wire brushes, steel wool or other
abrasive material. Clean the surfaces regularly
with a good quality domestic oven cleaner.
Remove the rack and side racks from the
salamander, this allows easy cleaning of the flat
side walls. Leave the tray in to collect all residue.
Crumb / Drip Tray
 Empty and clean daily.
Periodic Maintenance
NOTE: All maintenance operations should
only be carried out by a qualified
service person.
To achieve the best results cleaning must be
regular and thorough and all controls and
mechanical parts should be checked and adjusted
periodically by a qualified service person. If any
small faults occur, have them attended to
promptly. Don't wait until they cause a complete
breakdown.
It is recommended that the appliance is serviced
every 6 months.