SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 10-77
(dB)
Output
attenuation low
(dB)
32.00 is default
If you have selected Low Output power above
then the attenuation here will apply.
Output
attenuation preset
(dB)
0.00
If you have selected a preset (10, 50, 100,
200 or 500) output power above then the
attenuation here will apply.
Note-(1): All narrowband based range modes are licensed features. If you are not licensed
for a mode you’ll be able to select it but the unit will simply drop into Off mode
automatically.
10.7
Configuring the Audio Parameters
To work with the Audio tab:
1.
Click the Advanced button on the SOLO4 Transmitter Control Window
2.
The Advanced options window opens
3.
Select the Audio tab
10.7.1
Audio Settings
Sometimes, you’ll only want to use video on your link. In this case, you’ll want to switch
audio off completely.
This set of controls enables you to make decisions about the audio you plan to send over the
radio link.
Note: When you click Restore Defaults, Encoder 1 is set back to Embedded and Encoder
2 is set back to Off. This is the default condition.
Note: There are two encoders which work identically.