SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 8-48
8.
Basic Operation
8.1
General
This chapter covers normal day to day operations of a fully configured SOLH264TX system.
Once installed and configured the SOLH264TX is easy to operate. These guidelines will help
you perform basic operations on your Broadcast Transmitter.
Note: If you are working with a new system or you need to change any of the
configurations, look at the Advanced Operation and Control System chapters later in
this guide.
8.2
Starting and Stopping – SOLH264TX
SOLH264TX units don’t have power switches – you simply apply power to them and they will
start up.
8.2.1
Powering Up – SOLH264TX
You’ll need a fully configured SOLH264TX.
1.
Switch on the SOLH264TX using the procedure 7-6 above.
2.
On the display screen, you’ll see the text illuminate.
8.2.2
Powering Up – SOLH264ENGTX
You’ll need a fully configured SOLH264ENGTX.
1.
Supply power to the SOLH264TX using the procedure 7-7 above.
2.
Power is now immediately available to the camera.
3.
Switch the toggle switch to ON to power the transmitter.
4.
On the display screen, you’ll see the text illuminate.
8.2.3
Shutting Down – SOLH264TX
It can be important to shut down a system gracefully. This ensures that all processes are
terminated correctly and not data or settings are lost.
1.
Ensure the unit is not in sleep mode.
2.
Disconnect the power cable from the SOLH264TX.
3.
On the display screen, you’ll see the text go out.
4.
The system is shutdown safely.
SOLH264ENGTX Variant: Use the toggle switch to switch off the transmitter.