SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 8-53
RF Out
On
B/W
8MHz
TX Mode
Off
RF Power
100mW
RF Atten
0.00dB
8.3.6
Using the Local Settings Menu
You’ll need a powered SOLH264TX set at the root menu as in 8-3-1 above.
1.
Push Cancel / Back button
2.
You’ll see the frequency and the Unit Status: menu on the display screen
3.
Use the Joystick/Confirm button down arrow to scroll down to Local Settings
4.
Push the Joystick/Confirm button to enter the Local Settings menu
5.
You’ll see Serial, which is the first item in the Local Settings menu
6.
Use the Joystick/Confirm button to move up and down the Local Settings menu
7.
When you find a Config you want to change, press the Joystick/Confirm button to
select that Config for editing.
8.
Use the Joystick/Confirm button to move up and down the possible settings
9.
Press the Joystick/Confirm button to save the new setting
10.
Press the Joystick/Confirm button again to confirm the new setting
11.
When done, press the Cancel/Back button to return to the top menu
For a full list of the settings you can configure from the Local Settings menu, take a look at
the menu at 7-9-1.
8.3.7
Using the Control Panel Button Lock Feature
You’ll need a powered SOLH264TX.
1.
Hold Joystick/Confirm button then press Cancel / Back button for about 8 sec
2.
The Control Panel buttons will lock
3.
A key appears on the Display screen to show that the panel is locked
4.
Press and hold again to unlock the Control Panel