SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 13-110
A Chaining Cable (ASI Cable).
A PC with the Transmitter Controller software loaded.
A CA0343-2 USB to Lemo communications cable.
CAUTION: You must configure transmitter 2 to provide a known bit rate for the radio link.
Then, the bit rate for Video 1 and Video 2 when added together must not exceed the total
RF bit rate.
In my example, I’ve set transmitter 2 for Narrowband, short range mode. In this gives me an
available bit rate of about 4.8Mbit/s on the radio link. I’m planning to set transmitter one to
have a video bit rate of 3.8Mbit/s and transmitter two, 1.0Mbit/s. If I add those together,
they will fit down my 4.8Mbit/s radio pipe.
Step 1 – Connect the System
Figure 13-7 – Connecting for Chaining Mode