SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 7-44
7.7
Connecting Power – SOLH264ENGTX
The SOLH264ENGTX requires 12VDC. The unit can be powered from DC by using camera
batteries or an external power source.
Take care that the external supply is within limits for this unit. Aircraft for example, normally
use 28VDC supplies.
7.7.1
Connecting DC Power
You’ll need a camera battery and a SOLH264ENGTX.
1.
Connect the SOLH264ENGTX to your camera back plane.
2.
Connect the camera battery to the back panel of the SOLH264ENGTX.
3.
The camera now has power available.
4.
Use the toggle switch on the right hand panel to switch on the transmitter.
7.7.2
Connecting AC Power
You’ll need an AC Adapter (optional), SOLH264ENGTX and the CA0665 Cable.
CAUTION: First, connect the CA0665 cable to your AC Adapter unit taking care to observe
polarity and voltage requirements.
1.
Connect the XLR 4-way plug to the XLR jack of the SOLH264ENGTX.
2.
Connect the IEC mains 3-way plug (sockets) to the IEC mains 3-way jack on the AC
Adapter.
3.
Connect the IEC mains plug to your local AC supply and switch on.
4.
On the display screen, you’ll see the text illuminate.
7.8
A Look at the Control Panel
The control panel has two buttons. Here’s what they do:
7.8.1
Cancel/Back Button
Button
Does this…
Cancel/Back
Button
Press to cancel action or go back one level.
7.8.2
Joystick/Confirm Button
Button
Does this…
Joystick/Confirm
Button
Move the joystick for UP, DOWN, LEFT and
RIGHT.