manualshive.com logo in svg

COBHAM GRMON3, Руководство пользователя, Страница: 26 / 239

Поделиться
Скачать
COBHAM GRMON3 Скачать руководство пользователя страница 26

GRMON3-UM
June 2019, Version 3.1.0

26

www.cobham.com/gaisler

3.7.4. Running SMP applications from GDB

If GRMON is running on the same computer as GDB, or if the executable is available on the remote computer that is
running GRMON, it is recommended to issue the GDB command set remote exec-file <remote-file-path>. After
this has been set, GRMON will automatically load the file, and symbols if available, when the GDB command
run is issued.

$ sparc-rtems-gdb /opt/rtems-4.11/src/rtems-4.11/testsuites/libtests/ticker/ticker.exe

GNU gdb 6.8.0.20090916-cvs

Copyright (C) 2008 Free Software Foundation, Inc.

License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>

This is free software: you are free to change and redistribute it.

There is NO WARRANTY, to the extent permitted by law.  Type "show copying"

and "show warranty" for details.

This GDB was configured as "--host=i686-pc-linux-gnu --target=sparc-rtems"...

(gdb) target extended-remote :2222

Remote debugging using :2222

0x00000000 in ?? ()

(gdb) set remote exec-file /opt/rtems-4.11/src/rtems-4.11/testsuites/libtests/ticker/ticker.exe

(gdb) break Init

Breakpoint 1 at 0x40001318: file ../../../../../leon3smp/lib/include/rtems/score/thread.h, line 627.

(gdb) run

The program being debugged has been started already.

Start it from the beginning? (y or n) y

Starting program: /opt/rtems-4.11/src/rtems-4.11/testsuites/libtests/ticker/ticker.exe

If the executable is not available on the remote computer where GRMON is running, then the GDB command
load can be used to load the software to the target system. In addition the entry points for all CPU's, except the
first, must be set manually using the GRMON ep before starting the application.

$ sparc-rtems-gdb /opt/rtems-4.11/src/rtems-4.11/testsuites/libtests/ticker/ticker.exe

GNU gdb 6.8.0.20090916-cvs

Copyright (C) 2008 Free Software Foundation, Inc.

License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>

This is free software: you are free to change and redistribute it.

There is NO WARRANTY, to the extent permitted by law.  Type "show copying"

and "show warranty" for details.

This GDB was configured as "--host=i686-pc-linux-gnu --target=sparc-rtems"...

(gdb) target extended-remote :2222

Remote debugging using :2222

trap_table () at /opt/rtems-4.11/src/rtems-4.11/c/src/lib/libbsp/sparc/leon3/../../sparc/shared/start

/start.S:69

69 /opt/rtems-4.11/src/rtems-4.11/c/src/lib/libbsp/sparc/leon3/../../sparc/shared/start/start.S: No

such file or directory.

 in /opt/rtems-4.11/src/rtems-4.11/c/src/lib/libbsp/sparc/leon3/../../sparc/shared/start/start.S

Current language:  auto; currently asm

(gdb) load

Loading section .text, size 0x1aed0 lma 0x40000000

Loading section .data, size 0x5b0 lma 0x4001aed0

Start address 0x40000000, load size 111744

Transfer rate: 138 KB/sec, 765 bytes/write.

(gdb) mon ep $cpu::iu::pc cpu1

(gdb) mon ep $cpu::iu::pc cpu2

(gdb) mon ep $cpu::iu::pc cpu3

Cpu 1 entry point: 0x40000000

(gdb) run

The program being debugged has been started already.

Start it from the beginning? (y or n) y

Starting program: /opt/rtems-4.11/src/rtems-4.11/testsuites/libtests/ticker/ticker.exe

3.7.5. Running AMP applications from GDB

If GRMON is running on the same computer as GDB, or if the executables are available on the remote computer
that is running GRMON, it is recommended to issue the GDB command set remote exec-file <remote-file-path>.
When this is set, GRMON will automatically load the file,and symbols if available, when the GDB command run is
issued. The second application needs to be loaded into GRMON using the GRMON command load <remote-file-
path> cpu1. In addition the stacks must also be set manually in GRMON using the command stack <address>
cpu# for both CPUs.

$ sparc-rtems-gdb /opt/rtems-4.10/src/samples/rtems-mp1

GNU gdb 6.8.0.20090916-cvs

Copyright (C) 2008 Free Software Foundation, Inc.

License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>

This is free software: you are free to change and redistribute it.

There is NO WARRANTY, to the extent permitted by law.  Type "show copying"

and "show warranty" for details.

This GDB was configured as "--host=i686-pc-linux-gnu --target=sparc-rtems"...

Содержание GRMON3
















































































































































































































































Отзывы:

Нет отзывов