570-2000, Rev. E, 453-2000 Handheld Programmer Operations Manual
7.
Label and Report Printing
After successfully programming and verifying the ELT, tap the “Print” button for the
following options (Figure 20):
15-Digit Hex ID label
Country Code label
Combined label (ME406 series)
Report
Both the 15-Digit Hex ID and Country Code labels can be printed to a serial printer via the
bottom connector on the Meazura
MEZ1000.
Figure 20: Print Options
7.1
Printers
Compatible printers for labels
ONLY
are:
Dymo LabelWriter 300, 330, and 330 Turbo (
sites.dymo.com
)
Brady 1244 (
www.bradyid.com
)
Datamax E-4204 (
www.datamaxcorp.com
)
NOTE
: Artex does not provide or support the printers listed above.
7.1.1
Dymo LabelWriter Printer
The Dymo LabelWriter series of printers are available from most office supply stores.
Please note that only the serial option is supported, printers with USB interface only
are not supported. The Dymo LabelWriter series requires a serial adapter (null
modem) cable, which is
not
supplied or available from Artex. For a null modem cable
(P/N CAB-NULLMODEM), contact Aceeca International, Ltd at
www.aceeca.com
.
The recommended label stock for the Dymo series printers is Dymo Model 30327
LabelWriter Labels 3 7/16" x 9/16" (file folder label). It will be necessary to laminate
or overlay the label with a protective weather and wear resistant layer after
application to the ELT. The Dymo labels are
not
supplied or available from Artex.
7.1.2
Brady/Datamax Printer
For the Brady/Datamax printers, please refer to their respective web sites for
distributors that carry them. Please note that these printers are identical, Datamax is
the manufacturer; Brady is a primary re-seller.
The Brady/Datamax printer requires a serial cable and DB-9 male-to-male adapter.
Page 30
