570-2000, Rev. E, 453-2000 Handheld Programmer Operations Manual
3.
Palm™ Desktop Software
Prior to use, the Palm™ Desktop, as supplied on the CD-ROM disc (Artex P/N 510-1200),
must be installed on the Windows 95/NT/98/2000/Me/XP PC that will be used to interface
with the Handheld Programmer. Follow the on-screen instructions for installation.
NOTES
: The Palm desktop software works most amiably if a single Meazura™ (Palm)
device is associated with a single computer. It is possible to use more than one
Meazura™ device with the same computer, but attention must be given to selection of
appropriate user names when transferring data to and from different units.
The Palm™ software identifies the User Name when the Palm™ Desktop application is
installed on a PC. Only one User Name can be used with the Artex applications.
3.1
Hot Sync
Once installed and configured, the Palm™ Desktop software allows installation of
additional software applications, as well as performing the hot sync function to transfer
data to and from the Handheld Programmer (Meazura
MEZ1000). Artex provides a
USB cable (452-0103) to connect to a PC.
The hot sync function is accessed by tapping the HotSync icon on the main Meazura
screen as shown in Figure 6. The hot sync operation is described in greater detail in the
Aceeca “HotSync Guide” available free for download at
www.aceeca.com
.
Figure 6: Hot Sync Icon
Page 9
