570-2000, Rev. E, 453-2000 Handheld Programmer Operations Manual
Table 1 provides data for programming ELTs with certain protocol types. This
information is not used in all protocol types; hence, programming software may not ask
for this information.
The Artex Programming Software divides the ELTs into the following families:
9600 Baud ELT
2400 Baud ELT
9600 PA
Refer to Table 1 as instructed to complete programming sequences. For Table 1,
protocols are defined as follows:
Std Location
= Aircraft 24 Bit Address (Long) and ELT Serial (Long)
Aviation User
= Tail Number (Short)
Serial User
= Aircraft 24 Bit Addr (Short), Aircraft 24 Bit / National (Short), ELT /
COSPAS (Short) and Aircraft Operator (Short)
National Location
= ELT Serial (Long)
User Location
= Aviation User / Tail Number / Location (Long)
Table 1: ELT Data
ELT Part
Number
Description
Baud
Rate
COSPAS-
SARSAT #
Programmed
Serial #
Supported
Protocols
Model
#
Sequence
# Range
Production
# Range
C406 Series
453-5060 C406-N 9600 135
Same as
unit label
(5 digit)
Std Location
Aviation User
Serial User
User Location
National
Location
7 0-1638 0-9
453-5061 C406-N
HM 9600 135
Same as
unit label
(5 digit)
Std Location
Aviation User
Serial User
User Location
National
Location
7 0-1638 0-9
453-5000 C406-2 9600
See
Note 2
See
Note 2
Std Location
Aviation User
Serial User
6 0-1638 0-9
453-5001 C406-2HM 9600
See
Note 2
See
Note 2
Std Location
Aviation User
Serial User
6 0-1638 0-9
453-5002 C406-1 9600
See
Note 2
See
Note 2
Std Location
Aviation User
Serial User
6 0-1638 0-9
Page 12
