570-2000, Rev. E, 453-2000 Handheld Programmer Operations Manual
The number of records kept can be changed by selecting “Prefs” from the initial Sarcalc
screen (Subsection 6.5). The database can be erased by deleting the database
“SarcalcDB” from the main Meazura
screen, as shown in Figure 18.
1.
Tap the upper left-hand corner of the main screen to show the “App” drop-down
screen.
2.
Select “Delete”.
3.
Select “SarcalcDB” to delete. Individual records cannot be erased.
Figure 18: Database Delete Screen Sequence
6.5
ELT Reader Preferences
If “Prefs” is selected from the initial Sarcalc screen (Figure 14), the following items may
be selected (Figure 19):
Figure 19: Sarcalc Preferences
Readings to keep – 10, 20, 100, 1000 (Maximum number of readings to store in the
database)
ICAO Format – Octal, Hex, Decimal (Format of ICAO Address display)
Display Full Address – checked, unchecked (Check for display of full ELT message,
bits 9 –144 (30 Hex digits) or leave unchecked to display only bits 26-85 (15 Hex
digits)
6.6
Printing Messages
The message may be printed (via IR or serial connection) by selecting “Print” from the
Measure or Review screens. The report will print all the displayed data.
NOTE
: Artex does not provide or support the optional printer software, contact the
recommended source below.
Page 28
