57
•
Audio CODEC:
This field contains a textual representation of the audio CODEC, as
reported by the server. The RX100 only supports AAC in RTSP mode, but this field will
always be updated. This field will be empty if the RTSP stream does not have audio.
Network Tab for Color Bars
No additional information is presented in the Network Tab when the decoder is in Color Bars
mode:
Ancillary Data Tab
The Ancillary Data Tab shows the current running status of received ANC such as closed
captioning, SMPTE-2038, and SCTE-35 errors/SCTE-104 insertions. These indicators are only
valid if the decoder is configured for SDI output.
•
Closed Captions:
indicates if closed-captions are present or not present in the SDI output.
•
SMPTE-2038:
indicates if SMPTE-2038 ANC packets are being inserted in the SDI
output. Note that if the rate of SMPTE-2038 messages is low (i.e., 1 message/sec or less),
this indicator will show
Not Present
. Use the
SMPTE-2038 Inserted
count to monitor
insertion.
•
SMPTE-2038 Inserted:
indicates the count of SMPTE-2038 ANC packets inserted so
far.
•
SCTE-104 Inserted:
indicates the count of SMPTE-104 ANC packets inserted so far.
•
SCTE-35 Errors:
indicates the number of invalid SCTE-35 messages received. If this
count is non-zero, please contact the vendor of the device generating the messages. Note
that the decoder does not support DPI component mode, and will flag these as errors.
