44
•
Analog Audio Source:
Selects between the first and the second decoded audio services
for the analog output. This version of the firmware only supports the decoding of one
service, so this control is not available. A future firmware update will enable this
functionality.
•
Mute Left, Mute Right:
these controls will mute the corresponding audio analog output.
•
Gain Right, Gain Left:
these controls can provide independent audio gain or
attenuation for the left/right channels. The range for these controls is from -12 dB to
+12 dB, in steps of 0.5 dB.
•
Output Level:
This control is only displayed if the decoder is fitted with balanced audio
outputs. Select between
SMPTE
and
EBU
output levels.
Decoder Apply/Cancel Buttons
When the
Apply
button is clicked, the decoder configuration takes effect. All changes cause
interruption to the video stream, except for changes related to audio – namely any changes in the
Analog Audio Configuration or the Audio Service Selection.
If there are no errors, the Decoder configuration area closes. If any errors are detected, an error
message is displayed by the
Apply
button. The possible error messages are:
•
Error: no available IP License
: the
Source
parameter in the Decoder Input
Configuration is set to one of the IP protocols, and the unit does not have the IP License
(check the Admin License Keys Tab). Contact Cobalt Digital Inc. if you need to acquire
this license.
•
Error: no available RTMP Server License
: the
Source
parameter in the Decoder Input
Configuration is set to RTMP Server, and the unit does not have the RTMP Server
License (check the Admin License Keys Tab). Contact Cobalt Digital Inc. if you need to
acquire this license
•
Error: no available Dolby License
: the incoming stream has Dolby audio, and the unit
does not have the Dolby decoding license (check the Admin License Keys Tab). If the
program has other audio services, select an alternate audio PID in the Decoder Program
and Audio Selection area. Contact Cobalt Digital Inc. if you need to acquire this license.
•
Error: no available Genlock License
: the
Enable Genlock
parameter in the Decoder
Output Configuration is enabled, and the unit does not have the Genlock License (check
the Admin License Keys Tab). Contact Support if you need to acquire this license.
