6-2
Stopping the Engines
✓
Slowly bring the throttle levers to the idle
position.
✓
Move the shift lever to neutral.
✓
Turn the ignition keys to OFF position.
After Boating:
✓
Turn OFF your navigational lights, leave the
anchor light ON, if necessary.
✓
Check the bilge for gas fumes and water.
Operate the blower and bilge pump, if
necessary.
✓
Fill fuel tanks to prevent moisture due to
condensation.
✓
To prevent marine growth from accumulating on
the hydraulic cylinder shafts, make sure trim
tabs are UP and propulsion unit drives are in
the full IN position.
✓
Lock ignition key switch and remove the ignition
keys.
✓
Stow and secure all equipment.
✓
Pump bilges dry with manual switch.
✓
Close all water inlet seacocks.
✓
If possible, inspect the hull and propellers for
damage.
✓
Check for fuel, oil and water leakage.
✓
Clean any spills, stains or moisture from the
boat. Inspect sea strainers.
✓
Turn battery select switches to OFF.
✓
Turn breakers on electrical panel to OFF.
✓
Remove any food, garbage and wet gear from
the boat.
✓
Secure lockers, hatches and canvas as
equipped.
Содержание 360
