Cobalt Digital Inc 360, Руководство пользователя

Страница: 101 / 120

5-7
Allow the fabric to soak until the bleach has killed
the mildew and the stains can be brushed out with
a common kitchen scrub brush. Rinse the fabric
thoroughly in cold water to remove all of the soap.
This may require rinsing several times. Incomplete
rinsing can cause deterioration of sewing threads
and prohibit the fabric from being properly
retreated. Allow the fabric to air dry completely.
Sunbrella may also be dry cleaned. DO NOT
STEAM PRESS OR DRY IN AN ELECTRIC OR
GAS DRYER. Sunbrella is thermoplastic or heat
sensitive. Excessive heat can damage and shrink
the fabric. This method of cleaning may remove
part of the water and stain repellency that was
applied to the fabric during its manufacture. The
fabric should receive an application of an air-
curing treatment such as “303 HIGH TECH
FABRIC GUARD.”
Canvas Care
Do not store canvas wet or in an unventilated,
moist area.
Roll the canvas instead of folding. This is of
particular importance on side curtains or any part
with the clear vinyl “glass.” Handle the clear vinyl
carefully. It is soft and very prone to scratching.
Roll the top carefully around the bows and cover
with the storage boot provided.
Clear Vinyl
The clear vinyl “Isinglass” used in your bimini
enclosure is very reactive to heat and cold. Be
careful unrolling the vinyl in cold weather to
prevent cracking. Keep vinyl side curtains from
touching the bows (tubing) to prevent burning the
vinyl. If the boat is stored with enclosure in place,
heat buildup inside of the boat may discolor the
vinyl. Handle the clear vinyl carefully. It is soft and
very prone to scratching.
CAUTION
Your Bimini Top and Enclosure are
designed and intended for short-term use
only. Do not use for storage. Under no
circumstances should the boat be towed
with the boat top in the upright position.
Cleaning Clear Vinyl
Use a soft cloth; clean with a solution of Ivory or
Lux™ soap, liquid or flakes, and lukewarm water.
Allow to air dry. Never use any type of abrasive
cleanser; it will scratch the glass. Regularly apply
a UV screening agent such as “303
PROTECTANT” to keep the vinyl soft and flexible.
Zippers
When zippers are new, they can be a little difficult
to zip. Zip carefully without forcing. They will
loosen with use. A zipper lubricant may be used to
help new zippers as well as maintaining long
trouble free service. The most vulnerable part of
the zipper are the starting points. Use care when
starting zipper to prevent damage.
Snap Fasteners
Fasteners should be unsnapped as close to the
button as possible. Never remove canvas by
pulling roughly on one edge of the material. This
can damage the canvas as well as the fastener. If
the snaps become difficult to unsnap, rub candle
wax or paraffin around the stud and inside the
socket. Lubricants such as Vaseline™,
Chapsick™, or WD-40™ silicone spray can be
used, but care must be taken so the lubricant
does not stain the canvas or other surfaces it may
contact.
Teak Wood
Regular cleaning and oiling of teak wood will
maintain its original appearance. Use a teak wood
cleaner that will penetrate the pores of the wood
and cleanse them of dirt and stains. Do not use
caustic cleaners. They will damage the wood.
Immediately after cleaning, apply an oil sealer
with a soft cloth. Carefully follow the sealer
manufacturer’s instructions.
CAUTION
Teak wood sealers can be harmful to
other materials. Make sure you thoroughly
remove any of the oil that has come in
contact with any vinyl, gelcoat or other
material. Teak wood should not be
varnished as the natural oils will cause
poor adhesion.
Troubleshooting and Maintenance