Cobalt Digital Inc 360, Руководство пользователя

Страница: 107 / 120

5-13
Troubleshooting and Maintenance
Electrical
Plumbing
Symptom Possible Cause
No water at shower Fresh water pump circuit breaker tripped or in the OFF position – correct
or sinks the problem and reset; turn circuit breaker on.
Fresh water tank empty.
Fresh water pump defective – see Cobalt dealer.
Filter plugged – clean filter located at the tank under mid-berth.
Low water pressure at Damaged fresh water pump – see your Cobalt dealer.
all sinks and shower
Low water pressure Restriction or obstruction in water line.
at only one sink
Head will not flush Head circuit breaker tripped or in OFF position – correct the problem and
reset; turn circuit breaker ON.
Line to waste tank blocked – see your Cobalt dealer.
Symptom Possible Cause
Electrical component Circuit breaker tripped or in the OFF position – correct the problem and
will not function reset; turn circuit breaker on.
Dim or no lights Circuit breaker tripped or in the OFF position – correct the problem and
reset; turn circuit breaker on.
Battery discharged – charge battery.
Generator will Battery switch in OFF position – turn switch to ON position.
not start
Engine Problem – see Cobalt dealer.
No AC power Circuit breakers tripped or in the OFF position – correct the problem and
reset. Breakers are located in aft, port motor box storage and on the cabin
distribution panel.
Make sure shore/generator selector switch is positioned correctly.
Ground fault circuit interrupter tripped – reset button on the outlet and test.
If problem exists – see your Cobalt dealer.
CAUTION
Correct a problem with the electrical
system before resetting a circuit breaker.