Coastal Saunas Delmar, Инструкция по установке и эксплуатации

Страница: 4 / 29

4
Unpacking Your Sauna
Identify the three boxes (A/B/C) that arrived in your shipment. Place boxes in an open area. All three boxes are
labeled with the contents inside. It is recommended that a minimum of two people be present for unpacking
and assembly. Lay boxes flat on the ground with lettering facing up. Make sure the area is clear of debris. Open
the boxes from smallest to largest to make for light, fast work.
PRO TIP: Take extra caution to make sure the Glass Door does not swing out during handling of the front wall.
Many customers prefer to unbox the sauna outside and then bring the wall in as needed.
General Assembly Guidelines
TOOLS NEEDED
#2 Phillips Head Screwdriver (or Phillips drill driver - set on lowest setting)
Small Step Ladder
MOVING THE SAUNA AFTER ASSEMBLY
If the sauna needs to be moved after assembly, perhaps into an alcove or confined space, Coastal Saunas
strongly recommends the use of furniture sliders. These can be found at a local hardware store such as
Lowe’s or Home Depot. Place the furniture sliders under the feet of the sauna, or the perimeter corners of the
Base Platform of the sauna, prior to beginning assembly.
Important note:
When moving the assembled sauna:
1. Do not push on the cabin walls as this can cause damage to the sauna cabin.
2. Always push on the base platform to move the sauna.
3. After sauna has been moved to desired location, the sliders can be left in place to ease any future
movement needed.
GENERAL
All panels are labeled with white stickers. These can be left on the panels after assembly. That way if the
sauna is ever broken down for movement there is no confusion come re-assembly.