Coastal Saunas Delmar, Инструкция по установке и эксплуатации

Страница: 15 / 29

15
Hollywood Assembly Instructions
Step One : Open Box C (Floor Panel/Roof Panel/Bench Panel and Seat/Accessories Box). Lay the Floor Panel at
the desired location. The floor heater is towards the front of the sauna. Insert furniture sliders if desired.
Note: Do not walk or stand on any area of the floor panel except the floor heater panel!
Step Two : Open Box A (Front Panel/Back Panel). Install the Back Panel first by sliding the panel into the metal
brackets located on the Floor Panel. Next install the Front Panel by the same method used for the Back Panel.
Remove the plastic wrap from the Front Panel being careful that the glass door does not swing open. One
person should hold the Front and Back Panels in vertical position until the side panel has been mounted and
attached.
PRO TIP: Use caution when sliding the walls into the floor brackets that the brackets are between
each other and not on top of each other. If the brackets get flattened, use a flat heat screwdriver to open
them up