Coastal Saunas Delmar, Инструкция по установке и эксплуатации

Страница: 7 / 29

7
Step Five
: From Box C, install the Bench Seat by guiding it between the Right and Left Wall Panels. There are
two small oval wooden braces found in the Accessories Box that may be screwed into the Back-Wall Panel to
prevent the bench from sliding upward when the user sits on the front of the Bench Seat. The wooden brace
can be screwed into the Back Panel directly above the Bench Seat.
Step Six
: From Box C, install the Roof Panel. Feed all the electrical wiring where emitting from the top of the
Front and Back Wall Panels through the corresponding holes in the Roof Panel. Slide the Roof Panel over the
top of the sauna and secure it into position.
*Make sure wires do not get pinched between the walls and the
Roof Panel*
Step Seven : Once the Roof Panel is securely in place, use a step ladder to view the inside of the Roof Panel to
make the proper electrical connections. There are three ribbon cable connections: a two pin (temp sensor), a
three pin (chromo therapy light) and an eight pin (power) that come from the Control Panel area through the
Roof Panel along with one 120 volt, Three prong electrical cord connection. There are three additional 120
volt, three prong electrical cord connections to be made: One in the front right side of the sauna, and two in
the back.