22
10.
OXYGEN IONIZER –
Press button “8” to turn power on.
a.
The Ion button (
green light
) operates the Ionizer. The Ionizer will freshen the air while you are
using the sauna. This is optional and not necessary if you have the Cedar Wood model.
b.
The O3 button (
red light
) operates the Ozone. The Ozone will kill any bacteria/odors in the
unit. Recommended usage is just 10-15 minutes. Some people are sensitive to Ozone, so for
this reason we recommend using it between session while you are not in the sauna.
11.
OPERATIONAL CHECK
-
Once the sauna is assembled, a preset operation sequence must be performed.
a.
Press sauna ON button and red light will appear on control panel
b.
After 5 minutes, lightly touch each heater making sure you feel heat. Note, that the floor, calve
and front heaters are a lower wattage for comfort. If you feel a cold heater, please refer to the
FAQ’s.
c.
Set timer for 60 minutes; set temperature for 140°F
d.
Sauna should reach approximately 135°F during the first hour of operation
e.
After the initial preset programming is complete, sauna is ready for personal use.
Содержание Delmar
Страница 20: ...20 Control Panel Instructions ...
