Coastal Saunas Delmar, Инструкция по установке и эксплуатации

Страница: 16 / 29

16
Step Three
: Open Box B (Right Panel/Left Panel). The direction of the panel (Right vs. Left) is determined by
standing in front of the sauna. Install the Left Panel by lining up the panel to the Front and Back Panels.
Using the Installation Bolts provided in the accessories box, thread the Bolts through the holes in the Left
Panel to the Front and Back Panels. Finger tighten the bolts. The Right Panel will be installed later. A final
tightening of the Bolts will be performed with a screwdriver after the sauna is completely assembled.
*Do not over tighten installation bolts. It will cause damage to the sauna cabin*
Step Four
: From Box C, install the Bench Support Panels by lining up the magnets on the ends of the Bench
Support Panels with the magnets located on the walls. This step must be completed prior to the installation of
the Right Panel. Make the left side electrical connections using the four-outlet receptacle on the Left Panel.
Also connect the bench heater panel to the cord found in the middle of the Back Panel. The right side
electrical connections will be completed after Step Six.