Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 53
Support: +49 (0)2831/91021-50
07.03.2022
4 . 8
T - S l o t p l a t e ( O p t i o n a l )
For customers who do not want to/cannot clamp their workpieces by vacuum and prefer to work
with clamping elements, vices, etc., a T-slot plate can optionally be mounted on the vacuum table.
This can be ordered for the entire work surface as well as for individual segments.
The individual plates are 160mm wide and have the length corresponding to the width of the
machine.
They are mounted on the C-rails of the vacuum table.
Attention:
The passage height of the machine is reduced by 18mm due to the additional construction!
4 . 9
M i n i m u m L u b r i c a t i o n ( O p t i o n a l )
For the processing of some materials such as aluminium, it is necessary to lubricate or cool during
the milling process. Various systems are available for this purpose.
Compressed air is required for all systems!
4 . 9 . 1
Dyna Cut MDE
This system is a low-pressure system with coaxial spray nozzle for mist-free coolant application.
With this system, the coolant tank is under a pressure between 0.3 and 1.5 bar via a pressure control
valve, depending on the viscosity of the coolant. This ensures that after switching on the
compressed air supply, the lubricant and the blowing air are separated from each other at different
pressures to the nozzle outlet and the finest coolant droplets are pressed into the air flow at the
nozzle tip. The volume of the air flow at the nozzle tip and thus also the pressure are adjusted by an
Abb. 14: T-Slot Plate
