Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 23
Support: +49 (0)2831/91021-50
07.03.2022
2 . 6 . 2
Sa fety devic es tha t the ope rator must re trofit
Suction
For the processing of light metal alloys such as magnesium, aluminum, titanium and wood-based
materials, a suction device must be installed if it has not already been factory-installed.
NOTE:
Danger to people and the environment!
In case of incorrect handling, i.e., without suction, there is a risk
of particle matter development. At high concentrations this can lead to a fire. Since
fine dust acts inhaled, it mainly damages the respiratory tract. The following effects of
high concentrations of particle matter in the air can generally be observed:
•
Temporary impairment of the respiratory tract
•
Increased need for medication in asthmatics
•
Increased hospital admissions
•
Increase in mortality due to respiratory diseases
and cardiovascular problems
2 . 7
B e h a v i o r i n t h e e v e n t o f a f i r e o u t b r e a k a n d a c c i d e n t
Preventive measures
•
Always be prepared for fire and accidents!
•
Keep first aid kits (first aid kits, blankets, etc.) and fire extinguishing equipment
functional and at hand.
•
Familiarize personnel with accident reporting, first aid and rescue facilities.
•
Keep access roads clear for emergency vehicles.
Measures to be taken in the event of a fire outbreak and accidents
•
Immediately trigger emergency stop by emergency stop device.
•
If there is no danger to one's own health, rescue people from the danger zone.
•
If necessary, initiate first aid measures.
•
Alert the fire and/or rescue service.
•
In the event of a fire outbreak: If there is no danger to your own health, fight fires
with fire extinguishing devices and continue firefighting until the arrival of the fire
brigade.
•
Inform those responsible at the place of use.
