Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 84
Support: +49 (0)2831/91021-50
07.03.2022
1 0 . 5
T r a n s p o r t
Lifting points
The machine may only be transported and attached to the frame.
Transport of pallets by crane
Transport items attached to pallets can be transported with a crane under the following
conditions:
•
Cranes and hoists must be designed for the weight of the transported items.
•
The operator must be authorized to operate the crane.
Chip
Protective equipment:
•
Industrial helmet
Fig. 24: Lifting equipment
1
Attach ropes, belts, or multi-point hangers to the pallet
accordingly (Fig. 20) and secure the pallet against
slipping.
2
Check whether the transport pieces are not damaged by
the slings. If necessary, use other slings.
3
Ensure that the pallet cannot tilt when the center of
gravity is out of center of gravity.
4
Start transport.
Transport of pallets by forklift
Transport items attached to pallets can be transported with a forklift under the following
conditions:
•
The forklift must be designed for the weight of the transport items.
•
The transport piece must be securely attached to the pallet.
•
The forklift driver must be entitled to drive industrial trucks with a driver's seat or
driver's cab in accordance with national regulations.
