ZEFNET Pro User Manual
6
● Make certain the EVSE SAE J1772 charge cable is positioned so it
will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
● This product contains no user serviceable parts. Consult the
Customer Support section in this manual for service information. Do
not attempt to repair or service the EVSE yourself.
● Do not operate your EVSE if it or the SAE J1772 charge cable is
physically open, cracked, frayed, or otherwise visibly damaged.
Contact a Service Representative for service immediately. Consult
the Customer Support section in this manual for information on the
Service Representative in your area.
● Not for use in commercial garages where a COMMERCIAL GARAGE
is defined as a facility (or portion thereof) used for the repair of
internal combustion vehicles in which the area may be classified due
to flammable vapors being present (such as from gasoline).
● Do not place fingers inside of the coupler end of the SAE J1772
charge cable.
● Do not allow children to operate this device. Adult supervision is
mandatory when children are in proximity to an EVSE that is in use.
Additional Safety Instructions
WARNING: Turn off power to the EVSE at the circuit breaker
panel inside the building before moving, servicing or cleaning the
unit.
WARNING: Always turn off input power to the EVSE at the circuit
breaker panel prior to plugging into or unplugging from a wall
socket.
NOTE: VENTILATION - Some electric vehicles require an
external ventilation system to prevent the accumulation of
hazardous or explosive gases when charging indoors. Consult
