Climax LM5200, Руководство по эксплуатации

Страница: 4 / 102

Page 2 LM5200 Operating Manual
Safety Precautions
The primary challenge for most on-site maintenance is that repairs are often done under difficult
conditions.
Climax Portable Machining and Welding Systems, Inc. leads the way in promoting the safe use
of portable machine tools. Safety is a joint effort. As the operator of this machine, you are
expected to do your part by scrutinizing the job site and closely following the operating
procedures outlined in this manual, your own company rules, and local regulations.
General Safety Practices
QUALIFIED PERSONNEL
Before operating this machine, you must receive
training specific to this machine from a qualified
trainer. If you are not familiar with the proper and
safe operation, do not use the machine.
OBEY WARNING LABELS
Obey all warnings and warning labels. Failure to
follow instructions or heed warnings could result
in injury, or even be fatal. Proper care is your
responsibility. Contact Climax immediately for
replacement of damaged or lost manuals or
safety decals.
INTENDED USE
Only use the machine according to the
instructions in this operating manual. Do not use
this machine for any purpose other than the
intended use as described in this manual. When
using the tools, machine, accessories and/or tool
bits, you must determine the proper working
conditions and the work to be performed.
STAY CLEAR OF MOVING PARTS
Keep clear of the machine during operation.
Never lean toward or reach into the machine to
remove chips or to adjust the machine while it is
running. Keep bystanders away while operating
this machinery.
ROTATING MACHINERY
Rotating machinery can seriously injure an
operator. Lock out all power sources before you
interact with the machine.
KEEP YOUR WORK AREA CLEAN AND TIDY
Keep all cords and hoses away from moving parts
during operation. Do not clutter the area around
the machine. Keep the work area clean and well
lit.
AMBIENT LIGHTING
Do not operate this machine in ambient lighting
that is less than normal intensity.
SECURE LOOSE CLOTHING AND LONG HAIR
Rotating machinery can seriously injure an
operator as well as others close by. Don’t wear
loose fitting clothing or jewelry. Tie back long hair
or wear a hat.
HAZARDOUS ENVIRONMENTS
Do not use the machine in a hazardous
environment, such as near explosive chemicals,
flammable liquids, gasses, toxic fumes, or
radiation hazards.
HOSES, PENDANT AND ELECTRICAL CABLES
Do not abuse the pendant cable as this can
damage the cable and pedant. Never use the
cord for carrying, pulling or unplugging. Remove
any and all kinks before straightening the cable.
Keep cords and hoses away from heat, oil, sharp
edges or moving parts. Plugs must match the
outlet. Never modify the plugs in any way. Do not
use an adapter plug with grounded power tools.
Do not expose the machine to rain or wet
conditions. Always examine hoses and cables for
damage before use. Be cautious and never drop
electrical equipment, this will damage the
components.
REPETITIVE MOTION
Individuals can be susceptible to disorders of the
hands and arms when exposed to tasks that
involve highly repetitive motions and/or vibration.
STAY ALERT
Stay alert, watch what you are doing and use
common sense when operating machinery. Do
not operate machinery while you are tired or
under the influence of drugs, alcohol or
medication.