Climax LM5200, Руководство по эксплуатации

Страница: 38 / 102

Page 36 LM5200 Operating Manual
should be within 0.001 inch of each other, and the B points should also be within 0.001
inch of each other. If they are not, repeat steps 10 through 13.
For longer standard bed assemblies, repeat the previous steps adding 48 inch bed sections until
the desired bed length is obtained, and then finish with a 24 inch bed section.
Gantry Bed Assembly
First Half
1. Position one 24 inch bed section, one 48 bed section, one 48 inch gantry connect plate,
and one 24 inch gantry connect plate as shown in Figure 5.
2. Install 3 M16 fasteners (Item 3), and 3 M16 fasteners (item 7) into the 24 inch bed
section and 48 inch gantry plate, and tighten the fasteners to 200 ft-lb.
3. Install 3 M16 fasteners (Item 3), and 3 M16 fasteners (item 7) into the 48 inch bed
section and 24 inch gantry plate, and tighten the fasteners to 200 ft-lb.
Figure 5
4. Push the bed sections together and install 3 M16 fasteners (item 3), and 3 M16
fasteners (Item 7) into the 48 inch bed section and 48 inch gantry plate. Tighten the
fasteners to 10 ft-lb, then loosen them and retighten until they are just touching.