27
-
When entering the phone number, entering (
) represent a 3-sec. pause. (e.g. Switchboard
system, extension, etc.)
-
Up to 20 digits including (
) are allowed for each telephone number.
-
The 1st, 2nd, 3rd, and 4th Tel. numbers will be used as primary medical alarm number,
secondary medical alarm number, primary fire/CO2 alarm number, and secondary fire/CO2
alarm number, respectively.
11# -14# Account Number Programming (01-04):
-
Set the account numbers for the 1
st
-
4
th
Tel. numbers used for Reporting
respectively
.
-
In each field, key in an
Account Number
of 4 or 6 or 8 digits.
After editing and updating, click write to apply new settings.
4.4.1.4 Settings
The “Settings” tab allows you to program general configuration for CTC-1052-QT-DT35AW.
Click “Write” when you have completed all settings to confirm.
31# Ringer Enable for Incoming Calls:
-
When disabled, CTC-1052-QT-DT35AW will operate silent for an incoming call.
-
When enabled, CTC-1052-QT-DT35AW will sound a ring tone as an audio alert for an incoming
call. The user can answer the incoming call by pressing the HELP BUTTON or Pendant Button.
32# Audible Fault Alert:
-
When turned on, CTC-1052-QT-DT35AW will sound warning beeps every 30 seconds for AC
Failure.
-
When turned off, CTC-1052-QT-DT35AW will NOT sound warning beeps for a fault situation.
34# Emergency Button Enable:
-
When this function is programmed as
Button On
, the HELP BUTTON is activated. When
pressed, it will send an Emergency alarm report to the Monitoring Station.
-
When this function is programmed as
Button Off
, the HELP BUTTON is deactivated.
35# Silent Mode:
-
When Silent Mode is On, all normal operation warning beeps, guard time tone, key tone and
rings will be silenced. Speech Reporting made under Silent Mode will automatically be switched
Содержание CTC-1052-QT-DT35AW
Страница 1: ...CTC 1052 QT DT35AW User Manual Dec 18 2020...