Climax CTC-1052-QT-DT35AW, Руководство пользователя, Страница: 16 / 54

13
any DTMF key except the hang up key to
reset the communication time to its preset
duration.
Command 47
Off-Set Time
 After the Control Panel‘s power is supplied,
the time of the Check-in Report starts
calculating.
 According to the setting of Off-Set Time, the
Control Panel will send Check-in Report
once, and then send report according to the
setting of Command 43
－
Test call.
Function
Selection
Result
(1) 1 Hour
(2) 2 Hour
(3) 3 Hour
(4)
4 Hour
(5)
8 Hour
(6) 12Hour
 Factory default is set as ( 1 ) 1 Hour. When
the Off-Set Time is reset in programming
Mode, the time of the Off-Set period will
recalculate.
 Off-Set time Report will be sent only once,
and then the Control Panel sends Check-in
Report according to setting of period test
call, unless the Control Panel restarts or the
Off-Set time is reset.
<NOTE>

Whenever programming mode is
accessed, CTC-1052-QT-DT35AW will
reset the Off-Set timer.
Command 49
Supervision
 This option is used to enable system
Supervision function. Once enabled, CTC-
1052-QT-DT35AW will be able to receive
the check-in signals from Wrist Pendants
(WTR) to indicate their proper functioning.
Function
Selection
Result
(0) Disable
(1) 4 Days
(2) 5 Days
(3) 6 Days
(4)
7 Days
(5)
8 Days
(6) 9 Days
(7) 10 Days
 Factory default is set as ( 0 ) Disable . No
code is sent to Monitoring Center.
 When the supervisory timer expires and no
supervision signal is received from WTR ,
CTC-1052-QT-DT35AW
will send a
Supervisory Failure report.

Supervisory Failure is a status report.
Command 53
Voice Prompt Language

This command is used to set voice prompt
language.
Function
Selection
Result
(0) English
(1) Arabic (Reserved)
(2) Spanish (Reserved)
(3) Russian (Reserved)
(19) Other (Reserved)
(20) Beep
 Factory default is set as ( 0 ) English .
Command 54
Fall Sensor Sensitivity

This command is used to set Fall Sensor
Sensitivity.

There are 5 sensitivity levels for selection.
1=Lowest Sensitivity, 5=Highest Sensitivity
Function
Selection
Result