Climax CTC-1052-QT-DT35AW, Руководство пользователя, Страница: 13 / 54

10
Command 34
Emergency Button Enable

The Help Button can be enabled or
disabled to send an Emergency alarm
report:
Function Selection Result
(0)
OFF
(Disable)
(1)
ON
(Enable)

Factory Default is set as (1), ON .

OFF : Pressing the Help Button is unable
to send an emergency alarm.

ON : Pressing the Help Button will activate
the panel send an emergency alarm.
Command 35
Silent Mode

CTC-1052-QT-DT35AW can be selected to
operate in Silent Mode. This will mute all
normal operation
warning beeps , guard
time tone and key tone .
<NOTE>

Speech Reporting made under Silent
Mode will automatically be switched to
Listen-in, but call recipient can press
DTMF
keys to open two-way
communication or change modes.

If Command #31 is set as Enable ,
CTC-1052-QT-DT35AW will emit ring
tone for incoming calls even in silent
mode.

Silent mode will not mute the long beep
emitted during walk test.
Function
Selection
Result
(0) ON
(Silent)
(1) OFF
(Normal)

Factory Default is set as ( 1 ), OFF .
Command 37
AC Fault Report

The CTC-1052-QT-DT35AW can be
programmed to send a Fault Report when
an AC power failure is detected.
Function Selection Result
(0)
OFF
(Send No Report)
(1)
ON
(Send Report)

Factory Default is set as ( 1 ), ON .
<NOTE>

Reporting will only be made after
detecting
AC Fault condition
continuously for one hour.
Command 38
Follow-On & Call-Back Function
Function Selection Result
(0)
Follow-On
(Reserved)
(1) Call-Back
(2) Follow-On & Call-Back

When this function is programmed as ( 1 ),
after a successful reporting to the
Monitoring Center, CTC-1052-QT-DT35AW
will automatically hang up the line and start
a 5-minute waiting period to auto answer
any incoming phone calls from the
Monitoring Center.

When this function is programmed as ( 2 ),
after a successful reporting to the
Monitoring Center, CTC-1052-QT-DT35AW
will automatically enter the Follow-On
mode.
Once Follow-On Mode is terminated, CTC-
1052-QT-DT35AW will automatically start a
5-minute waiting period to auto answer any
incoming phone calls from the Monitoring
Center.

When the Monitoring Center calls back
within the 5-minute period (when call back