Climax CTC-1052-QT-DT35AW, Руководство пользователя, Страница: 15 / 54

12

The Guard Time Delay from a fall
detection (of a Fall Sensor) is set by
Command #66 .
Command 43
Periodic Test Call

CTC-1052-QT-DT35AW can be
programmed to make test calls periodically
(every 0–7 days, 0-23 hours, and 0-59
mins).
Function Selection Result
(000000) OFF
(
DDHHMM
)
DD: (00) - (07)
HH: (00) - (23)
MM: (00) - (59)
0 - 7 days,
0 -23 hours,
0 -59 mins
<NOTE>

Whenever programming mode is
accessed, CTC-1052-QT-DT35AW will
reset the Periodic Test Call timer.

Periodic Test Call will only function with
telephone numbers assigned to
SMS
reporting method in Command 20-24.
Command 44
Mobility Timer
This function monitors user movement around
the premises and sends an inactivity report to
the Monitoring Center if the user fails to reset
the inactivity timer.

This will disable or enable the Inactivity Timer
with selectable count down periods. Options
are:
Function Selection Result
(00) DISABLE
(01) 1HR
(02) 2HR
...
....
...
...
....
..
(36) 36HR

Factory Default is set as ( 00 ), DISABLE .
<NOTE>

The Mobility Timer counting down can
be reset by:
1.
Pressing the Reset Button on
CTC-1052-QT-DT35AW, or,
2.
Movement detected by PIR
Detector
3.
Only workable by entering 2 digits.

When Mobility Timer expires and no
reset signal is received, CTC-1052-QT-
DT35AW will start to emit one long
beep every 5 minutes to alert the user.
After 30 minutes, if reset signal is not
received, a mobility alarm reporting will
be made.

The reporting method for mobility alarm
is the same as the emergency alarm.
The report will be sent based on your
reporting methods without guard time
waiting.

When ( 00 ) is selected, no code is sent
to Monitoring Center.

When CTC-1052-QT-DT35AW is in idle
mode, press and hold the Learn Button
for 15 seconds, until you hear a long
beep. Release the button and the
Mobility timer will be suspended.
Command 46
Two-Way Period
 This command is used to program the
allowable time duration for Two-way voice
communication period (Speech mode). It
can be set from (
01 ) (1 minute) - ( 10 ) (10
minutes).
Function Selection Result
(01) 1 MINUTE
(02) 2 MINUTES
(03)-(10) 3-10 MINUTES
 During the two-way voice
comminucation , CTC-1052-QT-DT35AW
will emit two beeps via the telephone
handset to alert the call recipient the
remaining time of 20 & 10 seconds. Press