Clifford Intelliguard 850, Руководство по установке

Страница: 6 / 51

www.directed.com
4
primary harness wire connection guide
primary harness wiring diagram
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
primary harness wiring guide
This guide describes in detail the connection of each wire. Also included are possible appli-
cations of each wire. This system was designed with the ultimate in flexibility and security
in mind. Many of the wires have more than one possible function. Please read the instruc-
tions carefully to ensure a thorough understanding of this unit and how it operates.
h1/1 black ground
Connect the BLACK wire to a clean, paint-free sheet metal location (driver’s kick panel)
using a factory bolt that does NOT have any vehicle component grounds attached to
it. A screw should only be used in conjunction with a two-sided lock washer. Under
EMPTY Not Used
ORANGE Ground When Armed (500mA)
RED/WHITE (-) Accessory Output A (200mA)
BLACK/WHITE Dome Light Supervision Output 30
WHITE Light Flash Output
WHITE Light Flash Output
WHITE/RED Light Flash Input
BROWN Speaker Output 2
RED (+) 12V Constant
GREEN (-) Door Trigger Input - Zone 4
VIOLET (+) Door Trigger Input - Zone 4
BLUE (-) Trunk Trigger Input - Zone 5
WHITE/BLUE (-) Accessory B Output (200mA)
GREEN/WHITE (-) Normally Closed Input - Zone 6
VIOLET/BLACK Tach Input
GRAY (-) Hood Trigger Input Zone 6
BROWN Speaker Output 1
BLACK Ground
H1/1
H1/2
H1/3
H1/4
H1/5
H1/6
H1/7
H1/8
H1/9
H1/10
H1/11
H1/12
H1/13
H1/14
H1/15
H1/16
H1/17
H1/18