Clifford Intelliguard 850, Руководство по установке

Страница: 44 / 51

www.directed.com
42
1. Disarm system.
2. Transmit Channel 16. (Press 3 times then 1 time).
z
The LED will turn on and the siren will chirp 1 time.
z Primary (full trigger) zone adjustment has now been entered.
z Primary zone can now be adjusted.
3. Adjusting Primary Zone
z Press of the remote control to increase sensitivity.
z Press of the remote control to decrease sensitivity.
z The sensor Primary zone can be tested at any time during adjustment and
will generate 1 siren chirp each time the zone is activated.
4. Press to adjust Warn-Away zone
z Siren chirps 1 time.
z Warn-away Zone adjustment has now been entered.
z
Warn-away Zone can now be adjusted.
5. Adjust Warn-away Zone
z Press to increase sensitivity.
z Press to decrease sensitivity.
z The sensor Warn-away zone can be tested at any time during adjustment
and will generate 1 siren chirp each time the zone is activated.
6. Press of the remote control to return to Primary zone adjustment and lock
in Warn Away zone setting.
z Siren chirps 2 times.
z
Primary zone can now be re-adjusted as described in step 3.
z Or press again to lock in primary zone setting and exit
programming mode.
z The siren will chirp 3 times when sensor adjustment mode has been exited.
z A Auuttoo--ssccrroollll ffoorr aaddjjuussttiinngg sseennssiittiivviittyy - press and hold or to
increase or decrease sensitivity setting several levels rapidly.
remote adjustable omnisensor
The Omnisensor is designed for ease of adjustment by the user and to give the ulti-
mate in impact detection without the possibility of false triggers that are common with
less sophisticated sensor.
Installing the omnisensor
The omnisensor can be located in either the passenger or engine compartment. It must
be firmly mounted with the indicator arrow pointing UP to a vertical metal surface. For
best results it must be secured with sheet metal screws using ALL FOUR mounting points.