background image

10 WATT

Wireless Charging

Alarm Clock

ITEM 24714

PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN 

FOR FUTURE USE

GETTING STARTED

• Remove the product from the box.

• Please retain all packaging until you have checked and counted 

all the parts and the contents against the parts list.

PACKAGING CONTENTS

• Digital Clock with Wireless Charger

• Back-up Battery - button cell CR2032 (pre-installed)

• USB Cable

• Instruction Manual

FEATURES

• Digital Clock 10 Watt Wireless Charger

• Wirelessly charges compatible devices

• Displays in elegant white LEDs

• Displays Time, Date, Temperature

• Adjustable Temperature Units (C

°

/ F

°

)

• Sets up to 3 alarms at a time

• Ideal for use at home, office & travel

• Power Saving Mode (Sound Controlled)

• Back-Up CR2032. Button Cell battery included for memory 

setting

• Powered by 3 AAA batteries (not included) or Type C -USB 

(included)

IMPORTANT SAFETY INFORMATION

• Read all instructions before using this product.

• Keep the unit away from heat sources, direct sunlight, humidity, 

water and any other liquids.

• Do not operate the unit if it has been exposed to water, moisture 

or any other liquids to prevent against electric shock, explosion 

and/or injury to yourself and damage to the unit.

• Do not use the unit if it has been dropped or damaged in any 

way.

• Repairs to electrical equipment should only be performed by a 

qualified electrician.

• Improper repairs may place the user at serious risk.

• Do not use the unit with wet hands.

• Do not put objects into any of the openings. Keep the unit free 

from dust, lint, etc.

• Do not use this unit for anything other than its intended use.

• Keep the unit out of reach of children.

• This product is not a toy.

DESCRIPTION OF PARTS

LED Display

AL

 indicator is ON when any Alarm 1/2/3 is on.

PM

 indicator is ON when time is in PM time.

INSTRUCTIONS FOR USE

This unit can be powered by 3xAAA alkaline batteries (not 

included), or USB 5V through the Type C USB cable (included) 

from any suitable USB 5V power source.

Turning the Alarm Off

• When the alarm goes off it will last for 1 minute or you can stop 

the alarm by pressing either SET, UP or DOWN button once.

Setting Display Modes: There’re 3 Display Modes to choose from

• Display 1 = dP-1, Display 2 = dP-2, Display 3 = dP-3.

• dP-1 is the default display mode.

• Under normal time display condition press the UP button once 

to activate dP-1 mode. Press the second time to activate dP-2 

display mode and the third time to activate dP-3 display mode.

• In dP-1 mode: LED display alternates between time and date 

(with temperature).

• In dP-2 mode: LED displays your last setting (example alarm 

you’ve set etc).

• In dP-3 mode: LED displays your last setting (example alarm 

you’ve set etc) for 15 seconds and then return to the actual time 

display.

Setting Temperature Unit: You can choose between °C and °F

• The default temperature display unit is °C.

• In order to switch the unit: While you’re in normal time display 

mode long press the DOWN button for 2 seconds to switch the 

display unit to °F. You can also change it back to °C by long 

pressing the DOWN button for 2 seconds one more time.

Power Saving Mode (Sound control):

 In order to save power you 

can activate “Power Saving mode”. When this mode is activated 

your display automatically turns off after 30 seconds. And it 

comes back every time it detects a considerable ambient sound 

(example clap of your hands, etc). The display comes on for 30 

seconds before turning off again.

In order to active Power Saving model, while you’re in normal 

time display mode, press the DOWN button once. Display will 

show oNSd.

Cancelling Power Saving Mode

Press the DOWN button one more time to turn off the power 

saving mode. LED display with show - -Sd.

Wireless charger

After powering on the unit place your Qi integrated mobile phone 

on the wireless charging area located on the top of the unit. 

Wireless charging of the phone will start immediately.

• If you connect the Alarm Clock to regular 5V USB power source 

the internal wireless charger will charge your phone at the regular 

5W charging speed. (5V USB Power Source not included).

• If you connect the Alarm Clock to QC 3.0 Quick Charger, the 

internal wireless charger will charge your phone at a 10W fast 

charging speed. (QC 3.0 quick charger not included).

Voice Activation / Touch Feature

The Voice Activation feature will turn on the LED time and  

temperature reading when you make a noise (like a clap) or

 

by 

touching the unit. Note this is a power saving mode that can be 

turned off if you want the display to show all the time.

Important Information

Ensure your device is compatible. If a non-QI compatible device is 

used the charger may overheat. When the phone is not placed on 

the charging surface correctly your phone may not charge 

properly. Wireless charging may not work properly if you have a 

thick case on your phone. If needed remove it before placing your 

phone on the wireless charger. If a headset is connected to your 

phone when placed on the surface it may not charge.

Specifications

Input:

 5V 2A, 9V 1.5A

Output:

 5V 1A, 9V 1A

Stand by Power: 

<0 2W

Charging Distance: 

5-7 0 MM

Charging Effect:

 75%

Charging Power: 

10 W

Power Supply USB 5V/ 3*AAA battery case (battery not included)/

button battery included for clock

Care and Maintenance

Clean the unit with a soft, damp cloth. Never use chemicals or 

hard abrasives. Keep this unit away from wet or damp surroundings.

IC Statement

This device contains licence

exempt transmitter(s)/receiver(s) 

that comply with Innovation, Science and Economic Development 

Canada's licence-exempt.RSS(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interfer-

ence that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set 

forth for an uncontrolled environment.

This equipment should be installed and operated with minimum 

distance 20cm between the radiator & your body.

Powering the unit

A) Activating Back Up Battery

• Back Up battery (button cell) is located in a smaller compart-

ment within the main battery compartment.

• Lift and remove the battery cover at the rear of the unit.

• Inside the battery compartment there’s another smaller battery 

compartment (with button cell). This is a back-up battery. 

Unscrew or remove the battery cover of this back-up battery 

compartment.

• Remove the insulation tab, replace and secure the battery cover 

of back-up battery by the screw.

Replacing the Back-Up battery, when battery is drained.

• Lift and remove the battery cover at the rear of the unit.

• Inside the battery compartment there’s another smaller battery 

compartment (with button cell). This is a back-up battery. 

Unscrew and remove the battery cover of this back-up battery 

compartment.

• Replace the old Button Cell Back-Up battery (CR2032 button cell 

type) with a new one. Replace and secure the cover of back-up 

battery with a screw.

B) Main Power: There are 2 ways of powering this product 

(Battery or USB).

1.

Battery: Install 3xAAA alkaline batteries in the battery compart-

ment as per the polarity indicated and then place the battery 

cover back, securely.

2.

USB: Or insert the Type C plug of the supplied USB cable to 

Type C Power Port located at the rear of the unit. Plug the USB 

side of the USB cable to a suitable USB 5V power source.

NOTE:

• Do not mix old and new batteries.

• Do not mix different battery types; alkaline, standard (Carbon - 

Zinc), or rechargeable (Nickel - Cadmium) batteries.

• Do not expose battery to excessive physical shock, vibration, or 

liquids. Do not disassemble, attempt to repair or deform the 

battery.

• Do not dispose batteries in fire.

• Do not peel or damage the battery label. Risk of explosion and 

damage to product if batteries are replaced incorrectly. Follow 

safety information on battery.

• Remove batteries from the unit, if it is not intended to be used 

for an extended period of time.

• Batteries shall not be exposed to excessive heat such as 

sunshine or fire.

• Dispose of the used batteries according to the requirements of 

the local regional needs.

OPERATING INSTRUCTIONS

Setting the Time

• Press SET button for 3 seconds to enter Setting mode: Select 

either 12 or 24 hour format by short pressing UP & DOWN 

buttons. Press SET button to confirm your selection. Under 

12-hour format, PM indicator will light up on left of displayed 

time.

• After you’ve made your hour format selection you automatically 

enter into Hour adjustment mode. Hour digit flashes and it can be 

adjusted by pressing UP & DOWN buttons. Long press the button 

for moving numbers in a fast forward/ backward way. Press SET 

button to confirm your selection. This will lead into Minute 

adjustment mode. Minute digit flashes, and it can be adjusted by 

pressing UP & DOWN buttons. Long press the button for moving 

numbers in fast forward/backward way. Press SET button to 

confirm your selection and complete time setting.

Setting the Date

• When you’re in Time/ Temperature short press SET button to 

enter Date setting mode, then long press the SET button for 2 

seconds to enter into Year adjustment mode. Year value flashes 

and it can be adjusted by pressing UP & DOWN buttons. Long 

press the button for moving numbers in a fast forward/backward 

way. Press SET button to confirm your selection and enter in 

Month adjustment mode. Month digit flashes and it can be 

adjusted by pressing UP & DOWN buttons. Long press the button 

for moving numbers in a fast forward/backward way. Press SET 

button to confirm your selection and enter into Date adjustment. 

Date flashes, and it can be adjusted by pressing UP & DOWN 

buttons. Long press the button for moving numbers in a fast 

forward/backward way. Press SET button to confirm your 

selection and complete date setting.

Setting the Alarm(s): You can set up to 3 alarms at a time

• When you’re in Time/Temperature mode press SET button twice 

to enter Alarm 1, then press SET button once to enter Alarm 2, or 

short press SET button one more time to enter Alarm 3.

• When you’re in Alarm Mode (display shows - -A1, or - -A2, or - 

-A3) press UP button once to set the alarm on. This will turn the 

alarm indicator on and LED display will show oNA1 (oNA2 or 

oNA3). Press the SET button for 2 seconds to enter into alarm 

time setting. Hour digit flashes with alarm AL indicator on. Adjust 

it by pressing UP & DOWN buttons. Long press the button for 

moving numbers in a fast forward/backward way. Then press 

SET button to confirm the hour and enter into Minute adjustment. 

Minute digit flashes and it can be adjusted by short pressing UP 

& DOWN button. Long press the button for moving numbers in a 

fast forward/backward way. Then press SET button to confirm 

your setting and exit.

Cancelling Alarms

Note: When Alarm Mode displays A1 (A2 or A3) press UP button 

the second time to cancel the alarm. LED display will show - -A1, 

or - -A2, or - -A3.

WIRELESS CHARGING

BATTERY COVER

DC

DOWN
UP

SET

INSULATION TAB

BATTERY

COMPARTMENT

BATTERY COVER

OF BACK-UP

BATTERY

CR2032

BUTTON CELL

(INCLUDED INSIDE)

PM

AL

FRONT - Open: 27 cm x 36,39 cm / Closed: 9 cm x 18,19 cm  

Отзывы: