Clifford Intelliguard 850, Руководство по установке

Страница: 37 / 51

© 2004 directed electronics, inc.
35
horn output - pulsed /latched
z Pulsed: H2/9 YELLOW/WHITE wire will generate a pulsing (-) output when the
alarm is in full trigger. When arming and disarming the output does not operate.
z Latched: H2/9 YELLOW/WHITE wire will generate a constant (-) output when the
alarm is in full trigger. When arming and disarming the output will pulse as per
the standard chirp pulses.
auto immobilization - off /on
z Off: Turns the auto immobilization feature off.
z
On: Turns the auto immobilization feature on.
programming notes
Note #1: Adding a new transmitter in auto-learn configuration
z Press the arm/disarm button of the Radar 2 remote control; the siren will chirp
once.
z Immediately press arm/disarm again; the siren will chirp twice to confirm the
new transmitter has been programmed.
Note #2: Adding a new transmitter in custom-configuration
z For the arm/disarm channel, transmit the channel of the new three, four, or five but-
ton transmitter that you want to control that feature; the siren will then chirp once.
z Immediately transmit the same channel again, the siren will chirp twice to con-
firm the transmitter channel has been programmed.
z For the rest of the channels only one press of the button is required to learn, and
the siren will chirp the same number of times as the feature row.
N NO OTTEE:: When programming a new transmitter to custom configuration, an arm/dis-
arm channel must first be programmed before programming the remaining channels.
Note #3: Selecting siren sounds
After entering this feature, press the arm/disarm button. The siren will generate a five-
second sample of each available siren sound. Perform the following steps to add or
delete that specific sound.
z
Add sound: Press on the PlainView 2 Valet switch while playing the desired
sound to add that sound.
z Delete sound: Press on the PlainView 2 Valet switch while playing the
desired sound to delete that sound.