TO RE MOTELY
TURN ON A TIMED
AC CES SORY. . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two functions with the same channel: one
when the system is armed, another when disarmed. Pressing
button 2 whilst the alarm is armed will activate the system’s
timed output for any duration you wish between one second and
two minutes (the factory setting is 30 seconds; see
User-selectable features on pages 16-20).
TO RE MOTELY
OPEN THE BOOT . . . .
Button 2 (channel 2) can control another function when the system
is disarmed, such as an optional remote boot release. Pressing
button 2 whilst the alarm is disarmed will remotely open the boot.
TO AC TI VATE
OTHER OP TIONS
RE GARD LESS OF
ALARM STATE . . . . . . .
Button 4 (channel 4) and channels 5–9 and 10–12 (see How to use
your keychain remote control on page 6) can activate accessories
such as the IntelliStart remote engine starter, remote power
window control, ACG Garage Door Opener Interface, Concept
50x systems and accessories on your other vehicles, etc.
WHAT ABOUT
CHAN NEL 9? . . . . . . . .
Channel 9 is used to remotely enable or exit valet mode. See page
11 for more information.
Anti-CodeGrabbing (ACG) with Random Code Encryption
Protects you and your automobile from the most effective and onerous car stealing
device ever used by car thieves — a code-grabber. Code-grabbers literally record,
from hundreds of metres away, the code sent by your car alarm remote control.
Then the thief simply plays back the code when you’re gone, instantly disarming the
alarm and unlocking the doors. It’s like giving the thief your car keys. But not if you
have the Concept 50x, since it utilises complex digital signal processing and
unbreachable encryption to randomly change the digital code every time you use the
remote control. Your remote control will never transmit the same code twice, and
the control unit will never accept the same code twice. Thus the code recorded and
played back by the thief’s code-grabber will never be accepted by your Concept 50x.
Smart prior intrusion attempt alert
If you hear three chirps when you remotely disarm instead of the usual one chirp, it
means that a trigger or sensor was activated in your absence. When you enter the
vehicle and turn on the ignition (or start the engine), the LED will blink 1–6 times,
pause, then repeat the blink cycle 4 more times. Count the number of blinks in one
cycle and refer to the chart on page 14 to identify the trigger or sensor that was
activated whilst you were away.
8
