ClicBot KY002CK10, Быстрый старт

Страница: 24 / 90

主脑模块生成热点二维码 扫描热点二维码建立热点连接
热点连接适合没有 Wi-Fi 网络或者 Wi-Fi 网络信号差的场景。
* 热点连接的操作方法：
1. 在主脑模块 Brain 的屏幕上从底部向上滑动进入系统菜单，再选择设备图
标 ，点击“热点连接”，生成热点二维码；
2. 打开 ClicBot App ，选择“连接 ”。点击“连接” 后选择 “通过热点连
接 Brain”，进入扫描连接状态；
3. 用移动设备的摄像头扫描主脑模块的热点二维码，即可建立热点连接。
连接 安全隐私
安全信息
This device complies with part 15 of
the FCC Rules. Operation is subject
to the condition that this device does
not cause harmful interference (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
NOTE :This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will not
occur in a particular installation
If this equipment does cause harmful
interference to radio or television
reception,which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
--Reorient or relocate the receiving
antenna.
--Increase the separation between the
equipment and receiver.
--Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
--Consult the dealer or an experienced
radio/TV technician for help.
The device has been evaluated to meet
general RF exposure requirement. The
device can be used in portable
exposure condition without restriction.
FCC ID: 2AWR5-KY002
RSS-Gen Issue 4 December 2014"&"CNR-Gen
4e Décembre 2014:
--English:
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) This device may not cause
interference, and (2) This device must accept
any interference, including interference that may
cause undesired operation of the device.
--French:
Le présentappareilestconforme aux
CNR d'Industrie Canada applicables
aux appareils radio exempts de licence.
L'exploitationestautorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout
brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le
fonctionnement.
IC : 26344-KY002
GB19865-2005、GB6675.1-2014、
GB6675.2-2014、GB6675.3-2014、
GB6675.4-2014
45 44