Clevo 9800, Руководство пользователя

Страница: 70 / 156

1
2
3
4
5
6
7
8
4 – 8
F i r m w a r e
main menu
M
ULTI
-S
ECTOR
T
RANSFERS
(M
AIN
M
ENU
>H
ARD
D
ISK
Ø & H
ARD
D
ISK
1)
This feature determines the number of sectors in each block that
can be transferred together. The “Auto” Type setting selects the
optimum number.
LBA M
ODE
C
ONTROL
(M
AIN
M
ENU
>H
ARD
D
ISK
Ø & H
ARD
D
ISK
1)
If your hard disk is larger than 528MB (unformatted capacity), en-
able this feature. The “Auto” Type setting enables this setting if the
disk is large enough.
M
Warning
If you enable LBA mode
while setting the HDD
parameters manually,
be sure to enable it each
time you use the same
hard disk. If you don’t
you may encounter
read/write errors.
IDE A
DAPTER
1 M
ASTER
(M
AIN
M
ENU
)
Pressing Enter opens the sub-menu to configure the drive on the
secondary bus. For this system, this setting should be “CD-ROM”
Refer to Chapter 3: Modules for more on these modules.
The fields on this screen are the same as those for Primary Master.
þ
When to Use LBA
The “standard” or ATA mode
of “seeing” HDDs is inad-
equate for drives larger than
528MB. LBA mode corrects
this and allows for hard disks
up to 128GB.
ATA and LBA modes overlap.
So if LBA mode is not activated
when an HDD is first format-
ted, sections may not be read-
able under the LBA system.
(This does not matter with 528
MB or smaller HDDs).
If you’re using a HDD not for-
matted using LBA mode, do not
use the “Auto” setting.