19
BRAKES
This motorcycle is equipped with front and rear
hydraulic disc brakes. The brake fluid will drop as the
brake pads wear or if there is a leak. To ensure there
are no leaks, check the brake system often. Also
check the brake pads for wear and the fluid level.
If you feel abnormal free play in the brake lever, check
for wear on the brake pads. If you discover the brake
pads to be worn, replacement them immediately. If
the pads are still in good condition, there may be air
in the brake system. Visit your local Service Center for
assistance .
Checking Brake Fluid Level:
Park the motorcycle on level ground in an upright
position.
Check the brake fluid level at the reservoir or the
sight window. It should be above the lower mark. If
if isn't, check for wear on the brake pads. If the
pads are worn, replace immediately.
Make sure there are no leaks in the fluid lines.
Check for loose fittings or damage to the fluid lines.
A WARNING:
Add DOT3 or DOT4 brake fluid only from a sealed
container. Do not mix brake fluid types. Failure to
follow this warning could cause the brakes to fail,
resulting in serious personal injury.
Checking Brake Pad Wear:
Brake pad wear differs based on how often you use
the brakes, type of riding, and road conditions.
Normally brake pads tend to wear quicker on wet and
dirty roads. Be sure to check the pads for wear at each
maintenance interval.
You can inspect the wear on the pads by using the
wear indicator mark. If the pads are worn, have them
replaced immediately at an authorized service center.