Installation Guide / SolarRoof Terracotta Tile
15
Code-Compliant Planning and Installation Guide V 1.0 - Complying with AS/NZS1170.2-2011 AMDT 2-2016
- Installation Instructions -
Step 3:
Place the first PV Module on the Rails and apply the Universal
Clamp in the End Clamp position and fasten slightly with the Allen
Key. Make sure the frame of the PV Module is fully in contact with
the Universal Clamp as shown in the figure on the right. Visually
check the Universal Clamp and PV module are properly installed.
Solution 2 (Apply Universal Clamps)
Step 1:
Twisting the head of the Universal Clamp changes the functionality
from End to Inter Clamp as shown in the figure on the right. NOTE:
Please ensure the Universal Clamp C-U/30/46 or Universal Clamp
with Grounding Clip C-U/30/46-G is positioned correctly according
to "
Deployment of Grounding Clips
" (P13).
Step 2:
Incline the Universal Clamp to fit the lower channel against the
lower channel of the Rail and press the Universal Clamp down
towards the other side to securely fit the upper channel against the
upper rail channel, as shown in the figure on the right.
Note:
Before installation, make sure there is enough clearance between
the screw and lower module of Universal Clamp as shown in the
figure on the right.
