Apex Tool Group
P2544PM | 2021-02
9
3
EN
3
Menus and Functions
3.1
General functions
3.1.1
Switching on
To switch on the tool, press the Start switch.
3.1.2
Switching off
There are several ways to switch off the tool.
Option 1:
Remove the battery.
→
Tool switches off after 20 seconds.
Option 2:
1. Navigate to
Switching the tool off
:
>
2. Press the
button.
→
The
symbol is displayed on the LCD.
→
After five seconds, the tool switches off.
Option 3:
The tool will switch off if it is not used for a certain time. See 3.7.4 Setting the shut-off properties, page 25.
3.1.3
Selecting a button
When talking about pressing a button in this manual, this means the following:
1. Use the arrow buttons to navigate to the desired button (outlined in blue).
2. Press the
button.
3.1.4
Changing parameters
Enter the parameter by changing each character of the value individually. Each character can have a maxi-
mum value of nine.
1. Press the
button.
→
The value is highlighted in red and an arrow is displayed below the first digit. This digit can be
changed.
2. Change the selected digit using the arrow buttons.
3. Confirm with the
button.
→
The next digit can be changed.
4. Repeat the procedure with each digit of the value.
5. After the last digit confirm the input wit the
button to save the input.
All paths are specified starting from the main menu.
Fig. 3-1: Main menu
To go from the runscreen to the main menu, press the
key.