10
P2544PM | 2021-02
Apex Tool Group
3
EN
3.1.5
Change between FastApps/mPro mode
1. Select
>
.
2. Press the
button to switch between modes:
3.1.6
CID (CellTek ID Card)
To permit simple replacement of tools in production, a replaceable CID memory card is installed. When the
tool is switched on, the network settings are read from the CID and used to establish the WLAN connection.
When the tools are changed, the CID has to be installed in the new tool being used. Please refer to
P2543BA.
The following data are stored on the CID:
3.2
LCD setup
Fig. 3-2: Setup of the menus using the run screen and a submenu as an example
FastApps mode is activated.
mPro mode is activated. A connection to the controller is necessary, see document P2545KA.
•
MAC address
•
Network name (SSID)
•
Encryption
•
Network key
•
Use of the DHCP server
•
IP address
•
Subnet mask
•
Gateway
•
Country-specific settings
•
Roaming settings
•
Channel selection
•
Network certifikates
•
API license
•
FastApp configuration and archive
•
Tool settings
Item
Description
1
Application/Linking group/FastApp selection
2
Symbol of the current communication connection.
3
Symbol of the current menu
4
Rundown result
5
Arrow left and right indicates that there are other menu items available that are not yet displayed
on the LCD. To reach them, press
or
.
6
Submenus
Press
button to display the parameters.
03
03/03
45,3
Nm
620°
OK
01
4
2
6
5
3
1
